Top » Photo Equipment » Photo Accessories » Flashguns & Accessories » Flashgun 58AF-1 Digital

Small_web_logo

Flashgun 58AF-1 Digital


58-af-1
1 Year Guarantee
Availability: Within 2 working days

Delivery: £7.95

Canon E-TTLWithin 2 working days£259.99
Nikon i-TTLWithin 2 working days£259.99

Features

Due to its high GN of 58 at ISO 100/21° and 105mm focal length, the 58 AF-1 digital is not only especially powerful, but also can be used for indirect flash lighting to great effect. For the first time Metz integrated a reflector card that can be flipped open into its vertically tilting and horizontally swiveling reflector. In addition, the Bounce diffuser 54-23 is avilable as an optional accessory.

Using the integrated secondary reflector, additional brilliance can be achieved with this flash technology in close-up areas. The integrated slave trigger unit allows the 58 AF-1 to be implemented separately.
An additional plus for all those who want to use the 58 AF-1 digital apart from the camera: the new flash can be used wirelessly with the Canon E-TTL remote system and the Nikon i-TTL remote system, thanks to the integrated slave trigger unit.
58 AF-1 C digital: offers E-TTL and E-TTL ll flash operation from Canon.
58 AF-1 N digital: offers i-TTL and D-TTL from Nikon.

The high performance power pack P 76 can also be used with the 58 AF-1 digital, for reduced flash recycle time and a huge increase in capacity of flashes per charge. This flash power is available for all types of use in connection with the V 58-50 cable.

 
Tilt & Swivel Reflector
Simple to operate
Reflector card can be flipped open
 
 
58AF-1C
digital
58AF-1N
digital
Flash unit for analogue and digital cameras from:
Canon
Nikon
Maximum guide number at ISO 100 / 21° and max. zoom
58
58
Guide number at ISO 100 / 21° and 50 mm
42
42
Standard flash modes
Standard TTL flash mode
Automatic flash mode with 12 tele-computer apertures
Manual flash mode with 25 partial lighting levels
Stroboscopic flash mode
Fill-in flash mode
Special functions
Canon E-TTL / E-TTL II flash control
• / •
Canon E-TTL – remote flash system as controller / slave
• / •
Canon FE flash lighting memory with E-TTL / E-TTL II
• / •
Nikon matrix-controlled fill-in flash lighting
Nikon 3D multisensor fill-in flash
Nikon D-TTL- / D-TTL-3D flash mode
• / •
Nikon i-TTL- / i-TTL-BL flash mode
• / •
Nikon i-TTL – remote - flash mode as controller / slave
• / •
Nikon pre-flash function minimising red-eye effect
Nikon FV flash lighting measurement with i-TTL / i-TTL-BL
• / •
Nikon under-exposure display in EV
Standard equipment and functions
Swivel -and-tilt main reflector with motor zoom
24 – 28 – 35 – 50 – 70 – 85 – 105 mm (35mm format)
Swivel reflector-
rotation range
vertical in °
-7 / +90
-7 / +90
horizontal in °
270
270
Automatic / manual motor-zoom control
• / •
• / •
Extended-zoom handling for main reflector
Integrated wide-angle diffuser for illumination
for 18 mm (35mm format)
Integrated reflector card for main reflector
Zoom-size function (adapts to the format of the picture recording chip of the camera)
Additional secondary reflector with 2 light output levels
Full secondary reflector support for dedicated flash modes
Illuminated graphic multi-function LC display, e.g. to display
flash mode, range, flash parameter etc.
Automatic range display; optionally in metres / feet
• / •
• / •
Automatic X-sync shutter speed control
Flash ready display on flash unit / in viewfinder
• / •
• / •
Flash exposure control display on flash unit / in viewfinder
• / •
• / •
Manual flash exposure correction with TTL / automatic
• / •
• / •
Flash exposure sequences with TTL / automatic
• / •
• / •
Automatic AF metering flash control
Multi-zone AF metering flash for camera’s spot AF sensors
Synchronisation to the 1st or 2nd curtain (REAR)
Low-speed synchronisation (SLOW)
High speed time synchronisation HSS
Acoustic status signal (beep function)
Metering function
Manual key-lock function
Reset function (reset to factory settings)
Firmware update via USB connection
Energy-saving, automatic switch-off function (auto off)
Flash unit wake-up function via camera
Power supply
4 AA batteries
Battery operation:  alkaline 1.5V / lithium 1.5V
• / •
• / •
Rechargeable battery operation: NiCd 1.2V / NiMH 1.2V
• / •
• / •
Optional external power supply: Power Pack P76
The respective functions can only be used if the camera supports them!